Graffiti-Enz Red
Professional graffiti remover for routine graffiti on suitable painted,
sealed and smooth surfaces. Designed for councils, contractors, schools,
transport operators and facilities teams managing common graffiti incidents.
Painted surfaces
Glass & stainless steel
Australian made
Commercial supply
When to use Red
- Routine graffiti removal on suitable painted and smooth surfaces
- Spray paint, permanent marker, crayon and adhesive residue
- Painted brick, glass and acrylic-painted surfaces
- Stainless steel, vinyl, tiles and selected laminates
- Schools, public facilities, commercial buildings and transport assets
- Regular maintenance programs and repeat graffiti incidents
Red is the routine-removal option within the Graffiti-Enz range,
particularly for suitable painted, sealed and non-porous surfaces.
When to choose another option
-
For difficult graffiti on suitable unpainted brick, concrete,
masonry or stone, consider
Graffiti-Enz Gold
-
For residual staining or ghosting after the graffiti coating has been removed,
use
Shadow Remover
-
For small fresh incidents, service vehicles or spot cleaning, use
Super Wipes
-
For final cleaning after the removal process, use
Germ-Enz
Why professionals choose Graffiti-Enz Red
- Designed for common graffiti on painted and smooth surfaces
- Suitable for spray paint, marker, crayon and adhesive residue
- Useful across a broad range of public and commercial assets
- Australian made for professional operational use
- Available in practical professional pack sizes
- Technical guidance available for unfamiliar surfaces
- Suitable for councils, contractors and facilities teams
- Supported by Safety Data Sheet documentation
Surface compatibility guide
Red is intended for graffiti removal on a range of suitable painted,
sealed and smooth surfaces. Compatibility depends on the coating,
substrate condition, age of the surface and graffiti type.
- Painted brick
- Acrylic-painted surfaces
- Glass
- Stainless steel
- Vinyl surfaces
- Particle board
- Tiles
- Marble and stoneware where compatible
Always conduct a small, inconspicuous spot test before full application.
Paints, plastics, sealers, coatings and older finishes may respond differently.
Safety, WHS and operational use
Red is a professional graffiti-removal product and should be used with
the workplace controls and PPE specified in the product documentation.
- Wear suitable protective gloves
- Wear protective clothing
- Wear appropriate eye and face protection
- Use in a well-ventilated area
- Avoid contact with skin and eyes
- Prevent uncontrolled release into drains or waterways
- Include use in site procedures and risk assessments
Documentation and compliance
- Safety Data Sheet available for download
- Consistent product naming and documentation
- Suitable for workplace chemical registers
- Supports procurement and supplier onboarding
- Commercial pack sizes available for regular use
Always refer to the latest Graffiti-Enz Red Safety Data Sheet.
Handling requirements should be incorporated into workplace procedures,
employee training and site-specific risk assessments.
Typical application process
- Wear the PPE specified on the product label and Safety Data Sheet
- Test Red on a small, inconspicuous area
- Apply Red directly to the affected area
- Allow the product time to penetrate the graffiti coating
- Agitate with a suitable brush or cloth where required
- Wipe or rinse away the dissolved graffiti
- Repeat only where required
- Assess the surface for remaining staining or ghosting
Always follow the product label and Safety Data Sheet.
Application technique, dwell time and removal method may vary
depending on the graffiti, surface and site conditions.
Red or Gold — which should you choose?
Both products remove graffiti, but they are positioned for different
surfaces and job types.
What if a stain or shadow remains?
Red removes the graffiti coating. On some surfaces, pigment may remain
visible after removal and appear as residual staining or ghosting.
- Use Shadow Remover after the visible graffiti has been removed
- Treat only the residual stain that remains
- Always test the second-stage product before broader application
How Red fits into the Graffiti-Enz system
Red is the routine graffiti-removal product within the Graffiti-Enz range,
particularly for suitable painted and smooth surfaces.
- Red: routine graffiti removal on suitable painted and smooth surfaces
- Gold: difficult graffiti and demanding removal work
- Shadow Remover: residual staining and ghosting
- Super Wipes: rapid response and small spot-cleaning incidents
- Germ-Enz: final cleaning and surface finishing
Use our
Product Finder
or send us a photo of the graffiti and surface for technical advice.
Available pack sizes
500ml
Suitable for smaller jobs, field kits, trials and online purchasing.
5L
Suitable for contractors, facilities teams and regular operational use.
Councils • Government • Rail • Schools • Contractors • Facilities Teams •
Commercial Cleaners • Property Managers • Transport Operators • Asset Owners
Need Red for routine graffiti-removal work?
Tell us your surfaces, operating environment and expected usage and we’ll
recommend the most suitable pack size and commercial supply arrangement.